Modern Office Strandards Poland 2020

Modern Office Standards Poland 2020 / Rolfe Judd / CBRE /

Internal layout and grid should be designed to allow maximum flexibility in creating the office and parking space without the need for extensive transfer structures.

Planning grid & column grid/office layout /

8.1 ÷ 9.00

8.1 ÷ 9.00

8.1 ÷ 9.00

8.1 ÷ 9.00

STRUCTURAL GRID

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

1/3 SG

SPACE PLANNING GRID ELEVATION GRID

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

1/6

/ CBRE / Rolfe Judd / Modern Office Standards Poland 2020 / 15 A) GRIDS B2 / Internal layout and grids

Internal layout and grids / B2

CELLULAR OFFICE

GOODS & FF LIFT

LOBBY

ESCAPE STAIR

TELECOM & SWITCH BOARD

LOBBY LIFT

B2 Internal Layout and Grids (AD)

OPEN SPACE

Typical: 1. Structural Grid 8.10m to 9.00m, 8.25m to 8.40m works in majority of the cases 2. Partition Grid 2.70m to 3.00m (1/3 of structural grid) 3. Elevation Grid 1.35m to 1.50m (1/6 of structural grid)

There are many factors affecting the choice of a space planning grid for an office building; component sizes, structural span restrictions, offices sizes and car park grids. In many coun- tries a 1500mm grid is considered ideal as it works for office dimensions, car parking and common building material sizes. In Poland for last years a grid of 1350mm appeared to work most effectively, giving an 8.1m structur- al grid. Current regulations in regards to park- ing bays spacing requirements (B6) constrains greater structural spans. Car park layout and structural grid is dependent on many factors like building height, basement column size, building and site footprint etc., therefore it is impossible to establish one planning grid suit- able for all building types.

The facade design should ideally enable the erection of a partition at every 1/6th of struc- tural grid. It gives occupiers the ability to in- stall flexible cellular offices of 1/3rd to 2/3rd width of structural grid. It should be noted that it is not always pos- sible to design building following the above criteria. Sometimes, on difficult inner-city plots or on plots with extraordinary conditions other grid layouts might be more suitable and also achieve the standard.